-
R1,000.00From 2004 to 2020, Harley-Davidson Sportsters retained the iconic Evolution engine but introduced a new frame with rubber mounts to reduce vibration. Despite the popularity of these models, we couldn’t find a single engine stand designed specifically for the rubber-mounted Sporty’s—so we built one ourselves. Now, we’re adding to the community. Make your engine rebuild a lot easier with this engine stand. Very rigid and easily securable to your work bench. Powder coated black for a durable finish.
Made in South Africa
-
R70.00 – R200.00This unique exhaust header “Lego” fabrication system will take you from design to finished custom exhaust headers. There are a variation of block sizes each with both straight and curved blocks, which come in a variety of radii and degree bends. Each block features index markings in 30 degree increments…
-
R70.00 – R200.00This unique exhaust header “Lego” fabrication system will take you from design to finished custom exhaust headers. There are a variation of block sizes each with both straight and curved blocks, which come in a variety of radii and degree bends. Each block features index markings in 30 degree increments…
-
R70.00 – R200.00This unique exhaust header “Lego” fabrication system will take you from design to finished custom exhaust headers. There are a variation of block sizes each with both straight and curved blocks, which come in a variety of radii and degree bends. Each block features index markings in 30 degree increments…
-
R70.00 – R200.00This unique exhaust header “Lego” fabrication system will take you from design to finished custom exhaust headers. There are a variation of block sizes each with both straight and curved blocks, which come in a variety of radii and degree bends. Each block features index markings in 30 degree increments…
-
R1,500.00Finally, a purpose-built bracket that looks as good as it performs.
This aesthetically refined hard-mount bracket is specifically designed for Harley-Davidson Sportsters and engineered to pair seamlessly with the Bronco 4L Saddlebag System.Precision laser-cut from durable mild steel, the bracket provides a rigid mounting solution while doubling as a versatile utility rack for extended rides. Whether you’re packing tools, travel essentials, or everyday gear, this mount is built for the long haul—strong, functional, and unmistakably Bronco Iron.
Ride prepared. Ride far.
-
R600.00Free up the back end of your Harley with this subtle and sleek axle nut number plate bracket. A horizontal license plate mount straight onto any 1″ Harley Davidson axle. Just like your mullet, let your back fender fly free!
**Number plate to be made separately to fit dimensions of bracket.**
Read more and check the product out in 3D here:https://bronco-iron.com/2021/08/13/sportster-accessories/
See technical specifications below.
-
R80.00
Thanks to the technology of filament fusion 3D printing , we introduce the Helmet Key ring. Attach the Key ring to your beloved key that starts your rumble machine, and show it off on the barroom counter the next time you down that pint! Buy it in combination with the bearded skull helmet key ring to complete the collection, see link below:
see link for helmet key ring:https://bronco-iron.com/product/bearded-skull-key-ring/
-
R4,500.00
In South Africa, these are rare to come by so we decided to add it to the product line up. The Iron Jack 450kg gives you the wider deck needed for working on certain bikes and perfect for the Harleys. With it’s 450kg capacity and 190mm wide top deck the iron jack is sure to get the job done.
-
R600.00 – R900.00
Cutting block Jig for cutting standard Imperial outer diameter long radius bends. The block has angle graduation with 5° increments to clamp the cutting piece. Reduces vibration during cutting, allows you to firmly secure the piece without risk of crushing or scratching the surface finish of the tube. Made with…
-
R350.00
Design by Bronco Iron, printed in Cape Town, SA. This lightweight long sleeve tee features an intergalactic visitor design on the front breast and on the back said visitor is trying to abduct our latest hero, Willy as he makes his way through the klein karoo on route 62.
-
R400.00 – R800.00
Cutting block jig for cutting standard Imperial outer diameter tube into pie cuts. The block has two angle variations, 10 degrees and 15 degrees for making pie cuts. Reduces vibration during cutting, allows you to firmly secure the piece without risk of crushing or scratching the surface finish of the…
-
R300.00
Better late than never, this summer’s run of limited edition tees. If you like rabbits that smoke and are likely the type of asshole that will steal your drink and spit on the back of your shirt in a bar, grab a Rude Rabbit t-shirt before we cut the sleeves off all of them for fighting uniforms!
-
Out of Stock
R500.00 – R800.00
Cutting Block Jig for cutting standard Imperial outer diameter short radius bends. The block has angle graduation with 5° increments to clamp the cutting piece. Reduces vibration during cutting, allows you to firmly secure the piece without risk of crushing or scratching the surface finish of the tube. Made with…
-
R2,000.00
Originally referred to as the sister bar, the sissy bar was born in early 1960’s USA when some states brought in laws mandating the use of a bar on the back of a street motorcycle when lifting a passenger for safety reasons. As was to be expected at the time, bikers were not a group that really concerned themselves with safety. Bikers started referring to the bars as “sissy” bars because they were not happy about having to comply with the new law, and obviously those that did, were sissy’s.
But, the sissy bar managed to stick around, and naturally the term stuck too and remains the common term used today. In chopper culture groups, the sissy bar has earned a few more colorful monikers such as the bitch bar, or the bitch stick. Ironically, the modern sissy bar allows little room on the back for a sissy, more commonly equipped today for aesthetic or luggage carrying purposes.
Designed by Bronco Iron and Fabricated in Cape Town, South Africa.
Related Products: The Bronco Pack was designed to fit your Sissy bar for overnight journey’s, and a poncho can also be strapped on and used to keep your bird’s knees free of grass burns.
Read more and check out the product out in 3D here
See technical specifications below.
-
R1,000.00
As much as we enjoy putting our knees in the breeze and riding our mini Hogs, we also love skateboarding because we grew up on it. There is nothing better than having our boards along with us, because you never know when an opportunity may present itself. This optimally designed bracket allows for the ergonomic attachment of your skateboard snugly to your sportster rear frame. Now go on, pop an ollie over your Harley!
Read more and check the product out in 3D here:https://bronco-iron.com/2021/08/13/sportster-accessories/
See technical specifications below.
